• How to remove the door trim?

    So many motorists sooner or later face damage to the door trim. Damage in most cases is minor, but rather unpleasant, so there is a need to replace the skin. Of course, this can be done at a car dealership, but knowing how to remove the door trim, this can easily be done on your own, with the right tools and a certain skill.

    In most cases, you can cope with minor damage without removing the casing. If there is a need for restoration or replacement, it must be completely dismantled. There are a lot of car controls behind the door trim, so it is important to remove it without damaging them.

    It goes without saying that when dismantling the trim in different car models, the procedure may differ and different tools may be needed. However, the general principle of this work is very similar, therefore, in general terms, it is quite realistic to describe it.

    If you have the opportunity, consult with experts about the features of removing the skin for your particular car model.There are situations when in cars the dismantling and installation of a new door skin should be accompanied by the removal from the memory of engine faults of the data about it. Also, in some cases, it is possible the loss of the radio protection code due to such actions.

    It is possible to start dismantling the door trim only after disconnecting the battery to avoid damage.

    Dismantling door trim

    Much has been written about how to remove the driver's door trim. There are nuances that must be considered in each case. If the mirrors in the car are adjusted by manual control, it is necessary to first dismantle the drive lever. Only then can you begin to remove the door trim. In order to turn the driving lever of the mirror without damage, you need to remove the cover first with a small thin screwdriver. If the mirror is controlled differently, this procedure is not necessary.

    After the mirror is finished, you can proceed directly to dismantling the casing. The next step you need to take is the removal of the door triangle trim.This should be done with a small screwdriver. In some models of auto triangle there is no, instead you need, armed with a small screwdriver, remove the cover of the door lock button. Usually it is removed along with an antistatic button.

    Any of these manipulations must be done very carefully, as there is a risk of damage to the door trim. To avoid this, a piece of cardboard that fits in size should be placed under the blade of the screwdriver. This is usually enough to keep the skin intact.

    If you have done everything correctly and carefully removed all the covers, you can carefully remove the door trim. The main thing - do not damage it at the same time.

    This is a very general instruction how to remove the front door trim, as this procedure may be different for different cars. If you are unable to do this, seek the advice of professionals or a thematic forum.


    Related news


    How to select text on the keyboard
    How to dance drum step
    Nuts: composition
    How to choose a swimsuit
    Monkey from children's tights